» THP Home
» Before Moving In
» Building Codes
» Contact Info
» Find a Contractor
» First Time Buyers
» Free Catalog
» Garage Makeover
» Home Workshop
» Kitchen Makeover
» Links & Resources
» Outdoor Outlet
» Perfect Lawn
» Privacy Policy
» Reference Books
» Remodel Budget
» Rockler Sales
» Site Map
» Stainmaster Carpet
» Tools & Hardware
Build Like a Pro: Remodeling a KitchenKitchen remodeling is the most challenging remodeling you can do. You need good design information because there are many components to consider - from cabinets and countertops to appliances, plumbing fixtures, lights, and flooring. Careful planning and solid construction techniques are also essential ...
|
Home Improvement Article: Plumbing Basics
» Sizing Traps and Drains for Household Fixtures |
 Sizing drain, waste and vent (DWV) systems can be daunting enough to make most folks not want to go there. Plumbers calculate drain and vent capacity in "fixture units," consider issues like "trap-arm loading" and, if they're really fluent in effluent, take advantage of concepts like "wet venting." See what we mean? But if all you want to do is hook up a new fixture or the DWV lines in a simple bath, most of the time you don't need to do the math at all. |
To begin, keep the following rules in mind:
- Traps must not be larger than fixture drains.
- All fixtures must be vented in some manner to prevent septic gases from entering your home.
- Codes vary. Your community is governed by either the Uniform Plumbing Code (UPC) or the International Plumbing Code (IPC). But the following trap sizes are consistent, except where noted.
|
Fixture |
Minimum Trap Size |
| Bar sink |
1 1/2 inch |
| Bathtub with shower |
1 1/2 inch* |
| Bidet |
1 1/4 inch |
| Kitchen sink, disposal and dishwasher |
1 1/2 inch* |
| Laundry sink |
1 1/2 inch |
| Lavatory (bathroom sink) |
1 1/4 inch |
| Shower |
2 inch |
| Toilet |
3 inch |
| Washing machine |
2 inch | |
*The UPC requires at least a 2-inch drain immediately beyond the trap.
Source: Code Check: Plumbing, Redwood Kardon, et al.
When fixtures share a drain, calculating drain and vent size gets a bit more complex. Each type of fixture has a fixture unit rating, a measure of the peak rate of discharge through a drainpipe. A single-fixture unit rating of a typical bathroom sink, for example, is 7 1/2 gallons per minute. Adding together the ratings for the fixtures that will share a drain indicates the required drain or vent pipe's fixture rating. In the end, most bathrooms can be served by a 3-inch drain and a 2-inch vent. Without a toilet, a bathtub with shower and bathroom sink can share a 2-inch drain and 1 1/2-inch vent.
Materials you'll need:
- Sink fittings
- ABS pipe fittings
- PVC drain fittings
|
 |
| © by the Editors of CornerHardware.com |
|
